Expert Answers about Wheel Chocks
- Wheel Chock Recommendation for Disconnected Trailer on Hill
- Utilizing wheel chocks like the Anderson Tuff Chock # 3605 wouldn't be ideal for the angle you are stating. Of course the weight of the boat is likely not distributed evenly over the axle, there are some chocks I believe would work for the situation you stated. I recommend using the etrailer Wheel Chocks - Polyurethane - Qty 2 # 288-02011-2 which have a little more grip on the bottom of the chocks and have a little more give to ensure they won't slide down the hill. Another great option...
view full answer... - Wheel Chock For Use With Thule RV Wheel Levelers
- What you'll do is use a separate wheel chock behind the wheels after using the Thule RV Wheel Levelers # TH307617.
All you need to use is the Buyers Products 10" Wheel Chock # 337WC1086UWH.
view full answer... - Are Super Grip Chock Wheel Stabilizers Enough To Keep Trailer From Rolling
- The Super Grip Chock Wheel Stabilizers, part # UF21-001091 are designed to prevent the rocking of the trailer when you are parked. They are not intended to be used as brakes or wedges for the wheels.
It is never a bad thing to add additional wheel chocks like part # 337WC1467A to keep the trailer form rolling, especially on an incline.
view full answer... - Can MaxxTow Wheel Chocks Be Used When Loading And Unloading Boat On Ramp
- TheBuyers Products Wheel Chocks, part # 337WC1086UWH would certainly add some insurance when you are loading or unloading your boat on a ramp.
These chocks measure 10" long x 8-1/4" wide x 6" tall. You want to also make sure you turn the engine off and apply the emergency brake when on the ramp. You can never be too cautious.
view full answer... - Warranty for Andersen Camper Wheel Chock and Leveler
- The Andersen Camper Wheel Chock and Leveler part # AM3604 has a lifetime warranty so it will be covered for life from any manufacturing defects.
view full answer... - How Much Do the Super Grip Chock Wheel Stabilizers for Tandem-Axle Trailers and RVs Weigh
- The Super Grip Chock Wheel Stabilizers for Tandem-Axle Trailers and RVs part # UF21-001091 weigh about 5 lbs each or 10 lbs for the pair.
view full answer... - How to Safely Uncouple a Trailer on an Incline
- Whenever a tow vehicle and trailer are on an incline there will be pressure applied to the hitch ball and coupler. This will make it difficult to uncouple the trailer from the hitch ball. A trailer jack and/or hitch ball lubricant such as # 58117 can sometimes help.
The tow vehicle and trailer should always be on a level surface when coupling or uncoupling, and wheel chocks should always be used to ensure the safety of those around the trailer and the trailer itself. We offer a number...
view full answer... - Single Erickson E-Chock Versus Kit
- The cost of the Erickson E-Chock Wheel Chocks for E-Track - Powder Coated Steel - Qty 2
# EM09162-2 and the single # EM09162 vary from the manufacturer. We adjust our prices based on the manufacturer to attempt to keep the cost the lowest for all our customers.
They are the same product, so whichever is a lower price at any given time would be my recommendation.
view full answer... - Are There Temperature Ratings for Andersen Wheel Chocks?
- I spoke with a representative of Andersen, who said that there was not a temperature rating for wheel chocks # AM3604, but that you should be able to use them without worry. He said that he had never heard of a customer or dealer ever having an issue with these chocks due to temperatures.
view full answer... - Can I Cut Down My Anderson Wheel Chock
- The Andersen Camper Wheel Chock and Leveler, # AM3604 can be cut. Only one of the levelers will need to be cut down and it is recommended that you cut the narrow end but not to more than 4" should be removed. Please note the attached images. In addition, I have attached a short product video for you to review.
view full answer... - Tire Changing on Triple Axle with Blaylock EZ Jack and Wheel Chock
- Per contact at # EZ-Jack, they state that to use the # EZ-Jack on a triple axle trailer you will need to turn the curve up, opposite the wheel, and drive up on the jack and you will be able to change the tires.
view full answer... - Do You Carry The Balyock EZ-100 Jack?
- The Blaylock EZ Jack and Wheel Chock for Tandem-Axle Trailers # EZ-JACK is the EZ-100 EZ jack from Baylock. We use our own part numbers that are different from the manufacturers part numbers. It can support up to 20,000lbs and provides up to 6" of lift.
view full answer... - Can the Lippert Ground Control Jacks Be Retracted When Not Connected To a Truck?
- You can retract the rear jacks of the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System # LC358590 when it not connected to your truck. If you want to retract the landing gear/front jacks you will need to use Jack Stands # PTW41021 that are capable of supporting the weight of the 5th wheel while you retract the jacks. Also be sure the wheels are properly chocked as you do not want the camper to slide on the jack stands.
view full answer... - Can Block be Used Under etrailer Tongue Weight Scale
- Having your trailer be level is really important for tongue weight accuracy, so it is prudent and safe to put a block under the etrailer Tongue Weight Scale # e99044.
Just make sure the block and scale are on level ground and stable; also chock the wheels of your trailer to ensure it is as stable as possible.
view full answer... - Can I Use The Trailer Valet On My Concrete Driveway That Has a Slight Incline For Water Run Off?
- While the Trailer Valet XL Trailer Dolly # TVXL25 does say it is intended for use on flat surfaces a slight incline or decline will not be a problem for this dolly. Trailer Valet has tested and allows for up to a 10% grade or 5.7 degrees of incline or decline.
I would not recommend using the Trailer Valet on any surface that if your 2019 Jayco Jay Flight was disconnected from your tow vehicle, it would roll away without a wheel chock.
view full answer... - Recommendations for Improving Stability of Travel Trailer at Campsite
- The stability of your travel trailer is improved by making sure your RV is level, wheels choked, and your Lippert High-Speed Power Stabilizer Jack, # LC298707 extended appropriately on a wood or block base and not the bare ground where they can sink. I suggest using the Super Grip Chock Wheel Stabilizers for Tandem-Axle Trailers, # UF21-001091 and Stackers Leveling Blocks w/ Bag for Trailers and RVs, # A10-0920. Position these beneath your wheels to level the travel trailer and under...
view full answer... - Can Bottle Jack be Used For Leveling Trailer
- No you definitely don't want to use a bottle jack to level a trailer. They aren't made for leveling or stabilizing as they don't have the design needed; they don't attach to a large enough portion of the frame. If you need more leveling, use leveling jacks to do so:
- Ultra-Fab Ultra Scissor Jacks # UF48-979002
If you don't want to add more jacks then the best thing to do is use leveling blocks, Ultra-Fab Leveling Blocks for Trailers and RVs # UF48-979051.
view full answer... - Should Winching With Rear Winch Use Slave Battery With Bulldog Winch Rear Wiring Kit
- I recommend using your standard vehicle battery for your winch along with the Bulldog Winch Rear Wiring Kit # BDW20206. This is the standard option and simplest way to get power to your winch; I have added a link below to a help article on wiring an electric winch.
As for winching a few feet, you can use the electric winch, and yes, please do use wheel chocks when winching on snow and ice.
view full answer... - Does 4-Way Trailer Wiring Harness Have Reverse Light Feature
- I can certainly help you with that.
Since the Curt T-Connector Vehicle Wiring Harness, part # C55384 is a 4-way connector the four functions will be Yellow for the left turn and brake, Green is for right turn and brake, Brown is for running lights, and the White is the ground wire that gets attached to a clean metal surface.
For the reverse light function you will need a 5-way trailer connector and you can use the fifth wire to attach to the reverse light circuit on your vehicle. You...
view full answer...
Go To Results